How thick are targets made of steel?

Good evening,

which thickness has a steel plate have so that you can shoot it shot with 9mm without penetrate this the target? Here are my Google replies, mostly there are only purchase proposals for targets of air guns ...

Greetings - Felix

The best answer

"No more by" a normal VM projectile is already at 5 mm, however, receives the sheet still bumps.

A common material for steel targets and slats bullet catch is eg "Hardox", a special steel ect from the wells as for construction vehicles. be made.

But this material is not indestructible, as it takes only considerably longer than the normal sheet.

Will you actually virtually "forever" preserved remains only as a tool steel to be hardened. This is actually not get broken handguns projectiles over years.

I made several years ago, the deflector for our Zuganlagen from 10mm 1.2311 and hardened to 50 ... 52 HRC and tempered.

The Hardox plates we had it previously held usually about a year, then they were completely deformed. The cured panels hold now for almost 10 years without the slightest bump.

However, many hobby metallers like place already in the machining of Hardox times the cards and for machining tool steels one needs a little more know-how, also there hardenable steels impossible or very difficult in thin (ie 10 .. .12mm) strengths.

So I would advise you to give the Hardox plates that one gets relatively easily with the correct rating and they also haletn acceptable long.

10 mm would have as rich also normally.

Folding case panes on which I shoot (admitted to .45 ACP) have approximately 15mm

However, I can not say what type of steel is you.

Date: 2017-10-11 Views: 0

Related articles

  • How thick are always ultra secure night tie? 2015-01-14

    My always pantiliners are 2.6 millimeter thick. And my jessa night tie 3 millimeter thick. keep this night tie actually much more of it? Why are they only 0.4 millimeter thick? How thick are the always ultra secure night tie? Aud the homepage it is n

  • Why are cars made of steel? 2014-09-23

    The question interests me times on the Internet, I find, unfortunately, nothing maybe I can have someone here to help you would be nice. --answer-- Are they still do not. At least not completely. But what is of steel has some reasons. was steel and c

  • How heavy are 4,5mm Airsoft steel balls? 2013-11-21

    --answer-- Hello, in Airsoft used to not having the caliber, and even if that would be too dangerous. To my knowledge, these balls have program for airguns 0.45 + -. Otherwise, however, often including Greeting Bl 4.5mm BBs are not used for airsoft,

  • Prismabrille- How much are 2.5? 2013-03-05

    Hello, I was found a phoria. Now I have made clever me on the Internet and read that the glasses can be thicker before. Is 2.5 as a high value and how thick are likely to be the glasses? --answer-- in other words, the unit of a prism is ch / m. That

  • How important are Facebook Likes ?! 2012-10-22

    Hey guys. This may sound like a slightly infantile question, but I have noticed that most people "like-horny" are correct. In not so many Likes directly suffering the self-confidence. That's stupid! As you can see the whole thing with Likes? --a

  • Exactly how dogs are bred? 2013-08-30

    Hi Guys, I would sometimes like to know exactly how dogs are bred or specific breeds. I read and hear every time how much the animals are tortured by Überzuchtungen such as the pug, in which even the snout was grown too flat and now have breathing pr

  • How high are the chances to be accepted there? 2012-01-01

    Hello :) So I applied at Aldi, only had to make, I, did as they said in the interview above average well done, and was then invited to an interview because I made the test a Eignunstest. During the interview have the thought that if I already right f

  • How can I tell how thick my hair? 2012-08-27

    Hi everyone, I am considering whether I should be cut me a undercut, but I have absolutely no idea what I need to know and what suits me. Besides, I do not know why I feel how thick my hair actually are. Also, I'm rather shy, which is why I also do n

  • How big are the lightsabers from Star Wars? 2012-09-04

    My question is how big is actually the lightsabers from Star Wars as the average in cm? And I mean original from the film and nciht ihrgend which children things which are often made much smaller. --answer-- The "normal" lightsabers from the six



Copyright (C) 2017, All Rights Reserved.

M3tch all rights reserved.

processed in 0.927 (s). 10 q(s)