# Engineering

• ## Thermodynamics mole01-28

Hi folks: I come at a task not: Could you please help me? the gas amount of nitrogen, at 20 ° and atmospheric pressure, a volume of 5 m³ occupies, is in a 100Literflasche gefüllt.welche fuel quantity is in the bottle? how great the pressure of bottle

• ## Where can I do internship in mechanical engineering?05-24

I finished my college study in the field of technology and am authorized by Darmstadt University of Mechanical Engineering. Currently I live in Bochum and wants to do internship. --answer-- I would do it somewhere where you weld, solder, drilling, sa

Tags: Internship, Engineering
• ## i7 930 sufficient for gaming?03-16

See above. --answer-- By today's standards, this CPU is at most lower middle class. Although it has 4 cores + SMT, but the timing and the IPC (core performance per clock) are quite low. For complex, modern games can thus be almost the underlying perf

• ## How can I here by superposition set the idle voltage on resistance r2 (upper center) Calculate? Voltage divider, but how? yes Are 3 stitches. Thank you :)?03-16

--answer-- ① If you U₂ and U₃ shorts is to U₁ the series circuit of R₁ and R₂ІІR₄ and R₃IIR₅ wherein eg R₃IIR₅ the parallel circuit of R₃ and R₅ represents the resistance R₃ ∙ R₅ / (R₃ + R₅). Total resistance is therefore R = R₁ + + R₂ІІR₄ R₃IIR₅ and

• ## Why no satelite Have already tried with another Receiver. Satfinder shows 0% to Does anyone have an idea?03-14

--answer-- LNB broken bowl misaligned or defective cable. Attempts to exclude one after the other. Bowl adjusted? LNB defective? Ask an expert! Satellite reception is not only dependent on dish and receiver. Possibly can help a neighbor you have. If

• ## CMD - commands?03-12

Hi Guys! Since I am always gone for interressiere, I wanted to ask you if you give me perhaps you could name a few commands that I can enter at CMD. I'm doing this now for a little while, but my current knowledge is no longer enough for me. I would b

• ## Difference Automation and Automation03-12

Hello community, can anyone explain the difference between automation and automation me? Is there a difference? Thanks in advance and many greetings Sandvik --answer-- I would actually use the two words interchangeably. "Under automation or automated

• ## CnC machining simulation03-11

Hello, at school we learn a lot about engineering! I also do a 10-week internship where I know the basics of turning and milling. I search now a program where one because I can not work on CnC machines at Pramtikum and I have no € 100,000 left to me

Tags: Engineering, cnc milling
• ## Is it now in Germany (Region matter) possible work-study programs or training -möglichst technical Direction- in motorsports to be completed?03-11

--answer-- Should be possible. Hab Nürburgring ever seen advertising of Rowe. Top thou shalt diligently consider times where: http://rowe-racing.de/jobs/ You have horny ideas. ;-)

• ## How do I simplify CMOS circuits?03-11

See link: task http://www.directupload.net/file/d/4022/3frz6upo_jpg.htm I would like to know how I thereby foregoing, so I come to the solution. The circuit is a circuit DeMorgan corresponding NOR gate with two inputs. --answer-- Where is your real p

• ## Device from physics classes: D03-09

Hello, we have stayed at the Physics had such a device that you put into the outlet, and then could be a voltage, current, frequency, etc ... Setting and then decrease at the outputs. Example: You put the device into the outlet and will bring a lamp

• ## Is it possible to inflate a balloon so that the air for a long time (several months) does not escape - probably. by special gas or sealing?03-09

--answer-- Well the question is, how far the balloon then is still a balloon. On the subject of coating: the first occurs to me to immerse the entire balloon in epoxy resin. But then he is not a Richiger balloon more. Vill calibration it comes with w

• ## Guarantee - in time03-08

Hello! I last Christmas a laptop from Asus get (purchase date 25.12.), Which a year warranty ... Now several defects have occurred, since today I can no longer use the part in principle. So far so good, so I'm now requested a return receipt. The but

• ## Doorbell switch Dismount?03-07

Hello following problem. Whatever is at the door intercom behind the ringer switch appears from time to jam to for the bell to listen no longer to ring on. With the intercom in the apartment everything seems to be OK, because one of the two wires hav

• ## Resetting Windows to earlier date03-07

I wanted to ask how to reset the ACER PC to an earlier date without entering windows. For I did not come purely from windows. After loading screen black screen ... --answer-- Press Ctrl-F8 at boot, then the boot menu appears. Depending on which versi

• ## Electric motor with solenoid Help!03-06

hi people, in Physics I have a lecture on this electric motor hold: http://www.winklerschulbedarf.com/de/i/elektromotor-2-mit-elektromagnet-100546 Part of the presentation must be made "errors in the construction" exist, but I can think of none.

• ## beck buderus G..124L with water heating03-06

water in my Brunen contains too much lime, how can I prevent bechälter calcification in hot water --answer-- You should in the supply line to the boiler possibly a filter (membrane or charcoal - whatever that better / cheaper method) In applications.

• ## Studies for professional in automotive industry03-04

I would like to start this year to study, to work later in the automotive industry. I was informed for some time, but there are so many courses and Vertiefunge and I do not look all the way through. I know that some universities or UAS's offer vehicl

• ## ignis also dishwasher03-03

My also dishwasher washes with cold water. I suspect termoregulator is kaput. but I do not see the check or adjust. Rent apartment the dishwasher is installed. --answer-- Hello katyoko If the program until the end but does not pass through the machin

• ## Can one ampere operate a plant with 10-12 amps on 8?03-02

Dear Community, Have a question unzwa I have a music system and is in the instructions that they only with min. 10-12 amp must operate. However, I have a generator with 8 amps. What should I do now just try? Thanks in advance --answer-- The amps so t